John Mc Donnell
New member
- Joined
- May 31, 2024
- Messages
- 4
Apparently, I had this posted in the wrong place on this forum.
Hope I've got it right this time.
I have some ADR F760X-N and a F760X-RS for recapping.
The F760X-N's have all original Phillips caps on board.
According to the schematic, the A board should have two 8/25v caps,
but I find 15/40's instead.
The F760N-RS has been partially recapped with 22/63v for all 15/40v and 8/25v's.
Also on both B boards output amplifiers, the 4K7 resistors from the outputs
have been cut.
Any wisdom on the above would be greatly appreciated.
JackMc
Hope I've got it right this time.
I have some ADR F760X-N and a F760X-RS for recapping.
The F760X-N's have all original Phillips caps on board.
According to the schematic, the A board should have two 8/25v caps,
but I find 15/40's instead.
The F760N-RS has been partially recapped with 22/63v for all 15/40v and 8/25v's.
Also on both B boards output amplifiers, the 4K7 resistors from the outputs
have been cut.
Any wisdom on the above would be greatly appreciated.
JackMc
