sahib
Well-known member
Used but in excellent condition, potted AIWA power transformer with flange for external mounting (can also be used internally of course). Most suitable for Neve like micpre projects which require single 24V.
The taps are as follows;
Primary : 0 - 230V
Secondary 1: 12V - 0 -12V ( use for single 24V)
Secondary 2: 0 - 8V ( for relays, lights etc)
Secondary 3: 0 - 16V - 44V ( use 0-44 for +48V phantom)
The mounting flange is 70mm x 70mm and the overall height is 60mm.
7 available.
GBP 10.00 each plus shipping and paypal.
![1721238324414.jpeg 1721238324414.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84766-847adc8ac406492eadc3fb4385359e3d.jpg)
*******************************************************************************************************
Fuse boards.
These are leftovers from GDIY 51x/511 rack mount power supply kits and are now surplus to requirements.
Right is in, left is out.
The pictures show the 2 way Molex headers for remote rail status LED connections but the LEDs can also be soldered onto the board directly if needed.
Board dimensions are 75mm x 75mm.
I have 30 boards available.
Bare board without any of the components GBP 2.00 each plus shipping and paypal .
![1721238419562.jpeg 1721238419562.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84767-eddd975b5e09efed899b4faf239af837.jpg)
![1721238482513.jpeg 1721238482513.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84768-b51ee55bd5c91e36f527d9de93a3df9c.jpg)
The taps are as follows;
Primary : 0 - 230V
Secondary 1: 12V - 0 -12V ( use for single 24V)
Secondary 2: 0 - 8V ( for relays, lights etc)
Secondary 3: 0 - 16V - 44V ( use 0-44 for +48V phantom)
The mounting flange is 70mm x 70mm and the overall height is 60mm.
7 available.
GBP 10.00 each plus shipping and paypal.
![1721238324414.jpeg 1721238324414.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84766-847adc8ac406492eadc3fb4385359e3d.jpg)
*******************************************************************************************************
Fuse boards.
These are leftovers from GDIY 51x/511 rack mount power supply kits and are now surplus to requirements.
Right is in, left is out.
The pictures show the 2 way Molex headers for remote rail status LED connections but the LEDs can also be soldered onto the board directly if needed.
Board dimensions are 75mm x 75mm.
I have 30 boards available.
Bare board without any of the components GBP 2.00 each plus shipping and paypal .
![1721238419562.jpeg 1721238419562.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84767-eddd975b5e09efed899b4faf239af837.jpg)
![1721238482513.jpeg 1721238482513.jpeg](https://cdn.imagearchive.com/groupdiy/data/attachments/84/84768-b51ee55bd5c91e36f527d9de93a3df9c.jpg)
Last edited: