Hi All, I'm checking an AKG C-24 that's been in storage. I have the schematic, but not the pin-out of the 12-pin Tuchel microphone connector. The pin numbers are not clear enough to read and I want to check all the voltages before powering up the mic.
I see a primitive pass regulator for the 12.6V filament, but am reading 20+ V unloaded. Does anyone have experience with the N24S supply to let me know what to expect?
Thanks,
Ivan
I see a primitive pass regulator for the 12.6V filament, but am reading 20+ V unloaded. Does anyone have experience with the N24S supply to let me know what to expect?
Thanks,
Ivan