Amek Comp 9098 Schem ??

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 28, 2004
Messages
6
Hi guys, It´s good to be back home again ! ( forum )

(Harmann did it again Gyraf!!!)

I have a faulty Amek Comp 9098... this should be a VCA unit... happened yesterday and I tried a bit looking for th schematics but found none...

Both VU meters are stuck in -7 regardles of switch settings and no Audio.

Well, does anybody out there have some info on this one ? Schematics or any hint to start with ?

Thanks !
 
Well,

I opened it and the fuse of the +17 and -17 is burning... looks like the 12V and the 5V are ok, shold be for the logic part and VU meter bulbs...

Any clue on what should be dragging extra current ?? Maybe some Op Amp or VCA ? ( there are THAT´s 2252, 2151 in it )

Thanks

PH
 
If I understand correctly, the board for the 9098i comp is basically the Virtual Dynamics board from a console, with some front panel goodness.

I have some schems, but it's by no means an easy thing.

Keith
 
Hi Keith,

Would be cool to have the schematics anyway, when it´s not a hassle to you, let´s say, if you have them scanned. I´ll hand them to a tech anyway if the culprit isn´t located at the pwr supply. I just feel better to know that the CPU part seems to be working so far, then I (maybe) don´t have to return the unit to AMEK !!

Was cool also to know the unit from inside, I liked it !

Once again thanx

Phil
 

Latest posts

Back
Top