persistentsound
Member
- Joined
- Apr 27, 2005
- Messages
- 8
If you do and you're willing to share, please PM me.
I've seen the CMC5 schemo.
Thanks much,
Drew
I've seen the CMC5 schemo.
Thanks much,
Drew
Hi Drew,If you do and you're willing to share, please PM me.
I've seen the CMC5 schemo.
Thanks much,
Drew
Thanks for the hint. Tantalums should not easily die if used properly (only moderate ripple currents / never exceeding voltage ratings minus safety margin). Therefore the schematic would be nice to have to see how the implementation is done...Check the tantalums first.
Thanks for the hint. Tantalums should not easily die if used properly
Therefore the schematic would be nice to have to see how the implementation is done...
Enter your email address to join: