attack and release mod for Joemeek SC2.2 compresor

[jtvrdy]

Hi,
attached the schematics of the Joemeek SC2.2 compresor, for examle ,the release at the minimum is about 250ms to change this minimum to about 100-125ms which components need to be changed?I suposse that the capacitors 0.47uF,4.7uF and the resistences 1k and 33k are the responsibles bout how do they interact?

thanks!

 

[radardoug]

Its a sort of dual time constant. If you halve the 4.7 uF you will halve the release time and the attack time.

 

[jtvrdy]

and how affect the resistors?

thanks!

 

[radardoug]

Easier to change the caps. Cheaper too.

 

[abbey road d enfer]

I believe it's even cheaper to make R28 15kohm.

 

[radardoug]

Surely change 22K to 11K to halve the time at fastest, but it will also affect the pot law, and not in a good way.