Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hi


This is a topic already discussed around, IIRC there is no -definitive- answer about timing claim or label on a compressor

Basicaly timing have nothing to do with threshold or ratio, it's a time constant usually defined by RC network.

Thresold is the point you decide to charge/discharge the time constant network, and ratio is the amount of this stocked energy you decide to use to modify your output, Vin/Vout

Probably most define time directly with -physics- formula of a RC network:

-tau, which is the time for about 63% charge.

-but you can also define -time response- in physic, which is 3tau, 95%

-or 5tau 99%...


Cheers

Zam


Back
Top