saint gillis
Well-known member
I needed a little guitar blender that I could used for Hi-Z input or line level (amp's effect loop), so I ve made something based on "Moosapotamus Paralooper" & Sean Mc Lennan's B.Blender, with a single "Blend" pot, working in unity gain, it can work up to 6V amplitude signals without saturation if powered with a 9VDC transformer
Schematic :
Typon :
http://imageshack.com/a/img600/8969/57zz.jpg
Layout :
http://imageshack.com/a/img834/7532/q32c.jpg
- Don't forget to solder R1, R4 & R13 directly on the jack sockets,
-I ve used a 3PDT footswitch wired in true bypass (as you can easily find on the internet), I used a small 78L05 regulator with a 560R resistor for the LED, this way I can power the pedal from 9V to 24V without any problem.
Hope it can be usefull, cheers
Schematic :
Typon :
http://imageshack.com/a/img600/8969/57zz.jpg
Layout :
http://imageshack.com/a/img834/7532/q32c.jpg
- Don't forget to solder R1, R4 & R13 directly on the jack sockets,
-I ve used a 3PDT footswitch wired in true bypass (as you can easily find on the internet), I used a small 78L05 regulator with a 560R resistor for the LED, this way I can power the pedal from 9V to 24V without any problem.
Hope it can be usefull, cheers
