• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Audiofad Fader 10K LOG

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

saint gillis

Well-known member
Joined
Nov 4, 2012
Messages
889
Location
Brussels - Belgium
28 pieces of great quality Audiofad (Bournemouth) 10K logarithmic consol faders.
(See pictures following this post)

Model 1040P083 LOG10K.

Looks quite similar to the Trident Series 80 faders (but things must be checked)

Distance between the 2 screws : 12,4cm (124mm)

Good condition!

Price for 1 : 25€
Price for 2 : 45€
Price for 4 :  80€
Price for 10 :  150€
Price for the lot :  320€


IMG-0777.jpg


IMG-0778.jpg


IMG-0779.jpg


Tags : penny & giles - p&g - tkd - alps -
 
I work on a trident trimix and I guess this the same audiofad fader, I have 3 bad faders that doesn't cut the sound at 0
 
Hi Rob,
I live in Reims.
the distance between the 2 screws is 124mm and le slider course is 112mm
 

Attachments

  • IMG_20220128_121847.jpg
    IMG_20220128_121847.jpg
    196.8 KB · Views: 11
  • IMG_20220128_122109.jpg
    IMG_20220128_122109.jpg
    182.5 KB · Views: 11
  • IMG_20220128_122238.jpg
    IMG_20220128_122238.jpg
    171.6 KB · Views: 11
  • IMG_20220128_122118.jpg
    IMG_20220128_122118.jpg
    184.1 KB · Views: 15
These faders are 10k log part number 1040P059LOG10k.

However the measurements I am getting are the fader travel is about 110mm. The mounting hole centres seem to be about 112-114mm (there is some play in the mounting points).
 
my mounting screws are more close to 125mm 😔
 

Attachments

  • IMG_20220128_164552.jpg
    IMG_20220128_164552.jpg
    186.3 KB · Views: 11
These appear to be exactly 124mm measure screwed into this panel.

It is a shame you didn't ask for these 2 weeks ago. About this time of day 2 weeks ago I was driving past Reims going to a job. I used to own a 39 input (yes, 39 inputs channels) trimix a few years back. A nice console and easy to get most of the parts other than the faders and the led meter chip.

20220128_155125.jpg20220128_155117.jpg
 
what is the price for 1 mono ? for the moment i need to change 3 of them but i just check 12 channels on this 24 channels
 
ok nice! so I will finish to full check the trident and give the right number of fader, thank you! 😊
 
Back
Top