Auditronics PS-1215M Power Supply

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Darrenbennett

New member
Joined
Oct 31, 2020
Messages
3
Hi Everyone,

I have recently purchased a 1981 Auditronics 700 series console to bring back to life.
Having some issues with the power supplies, it's the PS-1215M Power Supply.

The runs 2 of these, I don't know the current requirements of the desk and there are no details in my documents.
If anyone out there has some details on these supplies that would be an amazing help, or even some info on it's current needs i can look at building an updated supply for it.

Happy to share the console schematics I do have for anyone who may need them.

Thankyou!!

Ps: show of hand's if you want to see updates of this hilarious undertaking...
psu1.jpg
 
I do not have any docs to help you, but unless it is a very large console (over 24 channels) it will probably run on one supply. Auditronics were popular in radio stations and would have had redundant power supplies. Good luck and yes, post updates!
 
Hi Mj,
She is 36 channels and 9 stereo buses... and manual clearly states both are required.
So far its looking like the caps could be an issue.

Stay tuned.
 
Back
Top