jilski
Member
- Joined
- Sep 16, 2015
- Messages
- 22
I have read the thread about using these Behringer BE-46/47 in the GSSL console. There I gathered the voltage these lamps take is 12v. However, how would I calculate the series resistor if I don't know the current they draw? Does any one know the current draw? I need to connect two of them in series across 30v, so a 6v drop is needed with that resistor.
Would it be possible to find out the current draw by hooking them up to 12v and measuring? Sorry if this post is stupid/obvious. I'm not sure how it is done without breaking them.
Would it be possible to find out the current draw by hooking them up to 12v and measuring? Sorry if this post is stupid/obvious. I'm not sure how it is done without breaking them.
