Behringer Ultra Q PEQ2000

[Siegfried Meier]

Hey guys,

So I have a few older 90's pieces of Behringer gear that accept the OT-1 transformer.  I acquired a number of them for real cheap and installed them this week, and the gear is actually quite decent sounding.  However, upon installing the transformer into the EQ, I broke one of the Q pots right in half…I've never repaired the PCB on a pot before, and I highly doubt it's really even possible.

So, the difficult task now is to find a pot that fits this thing.  It's an A100k with a long shaft that terminates in a D for the knob.  They do have that step feeling, but aren't stepped.  I don't really care if I can't find one that does that, but just want something that fits and works.  I've emailed Behringer, but since the unit is so old I'm not sure they'd even have parts for them…

http://www.behringer.com/EN/Products/PEQ2000.aspx

Curious if anyone has anything, or knows where to look?

Thanks!
Sig

 

[TheJames]

Behringer would be your best source if they have them.

If not...ALPS (or some knock-off of ALPS) probably made that part.  It should disassemble by lifting the tabs on the top of the pot.  You could maybe find another A100k pot, take them apart, and swap the PCB with the pins and tracks.

I found this:

http://www.dbmproaudio.com/behrparts.html#POT

 

[Siegfried Meier]

That's great!  Thanks for the info, I'll look into it!

Sig