Giganova
Member
Hey guys --
quick question about a DigiKey bi-polar power supply which I want to use to rack up vintage mic pres:
I have the DigiKey +/-24V 0.6A power supply (HAA24-0.6-A). The output pins are
Output 1 -
Output 1 +
Output 2 -
Output 2 +
(see picture on the link below)
All I need is +24V and a -24V. Do I have to solder the two Output 1 + / Output 2- together and to ground??
Thanks!
http://giganova.com/ADM_powersupply.JPG
quick question about a DigiKey bi-polar power supply which I want to use to rack up vintage mic pres:
I have the DigiKey +/-24V 0.6A power supply (HAA24-0.6-A). The output pins are
Output 1 -
Output 1 +
Output 2 -
Output 2 +
(see picture on the link below)
All I need is +24V and a -24V. Do I have to solder the two Output 1 + / Output 2- together and to ground??
Thanks!
http://giganova.com/ADM_powersupply.JPG