laddie.music
Well-known member
- Joined
- Nov 1, 2011
- Messages
- 59
Hi everyone. I was not able to find an answer with searching.
Realy appreciate any thoughts.
I am building 8 channels of API 312 preamps with mitsos board.
Been chipping away slowly at it for a year.
I read that there was no need for a zobel or load resistor when using the cinemag CM-75101APC.
My question is this... on the board there is
CZ (zobel cap)
R10 input trafo zobel
R12 input trafo load resistor
I guess i'm wondering since I read 'no zobel or load resistor needed'
Does that mean no CZ, R10 or R12
I guess I dont know what they meant by 'zobel' because there is a zobel resistor and cap....
anyways, any thoughts
Thanks very much for your time
Prahlad
Realy appreciate any thoughts.
I am building 8 channels of API 312 preamps with mitsos board.
Been chipping away slowly at it for a year.
I read that there was no need for a zobel or load resistor when using the cinemag CM-75101APC.
My question is this... on the board there is
CZ (zobel cap)
R10 input trafo zobel
R12 input trafo load resistor
I guess i'm wondering since I read 'no zobel or load resistor needed'
Does that mean no CZ, R10 or R12
I guess I dont know what they meant by 'zobel' because there is a zobel resistor and cap....
anyways, any thoughts
Thanks very much for your time
Prahlad