Building the Jensen AS016 Microphone Preamp Front End

[straypacket]

I have uploaded the new PCB to OSHPark, with pads resized for Mountain switch part #108-2MD1T2B2M6QE-EVX.

The board can be seen / purchased from the same link as in the previous posting.

I have a zip of the new gerbers for Rocinante, but the site isn't letting me attach a zip file (?really?).  So Rocinante, PM me with your email and I'll get the gerbers to you.

I will post again with the Eagle files.

 

[straypacket]

Another update:

Here is a Mouser cart for 2 channels:
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c55691f6f1

I have attached the Eagle BRD file (version 1.8.1).

 

[Rocinante]

Thank you man. This is a really useful contribution.

 

[Rocinante]

Stray,
So how important is the resistor accuracy other than the matched 6k81's which I remember should be pretty accurate. For instance I have 620r can I use that instead of 619r?

 

[straypacket]

Not sure - I tend to get 1% resistors and call it close enough in most cases.  But then again, look at my signature