CAPI-Gear; CA-0252 (2520 Type), CA202 Opamp Kits and DIY Parts Galore!!!

[TillM]

Directly from CAPI.
There is no CAPI seller in Germany

 

[gar381]

Due to supply chain problems I am temporally using BC550C ON TAPE instead
of bulk. These are well marked in the little kit bags in the kit.
Do not mix these up with the BC560C which are on tape and loose in the kit
when assembling "gar" DOA kits that Jeff sells

GARY

 

[innercityman]

Directly from CAPI.
There is no CAPI seller in Germany

Ok so import taxes to add to price + shipping.

 

[TillM]

Yes.
VAT+Customs+Shipping.
You must add Custom and VAT (in Germany circa 22%) to the overall price.
So if your order from CAPI for like 350$ with shipping, then add circa 22%.

 

[SIXTYNINER]

1/1/2013 Update:
-BB2521 IC-Discrete hybrid opamp kits added to the store. http://classicapi.com/catalog/index.php?cPath=71_183
-One time batch of NOS Philips NE5534N's added to the store along with TI's LME49710's http://classicapi.com/catalog/index.php?cPath=71_73

2/2/2013 Update:
-EA2622's are back in stock http://classicapi.com/catalog/product_info.php?products_id=80

5/19/2013 Update:
-Elma-Neve-Marconi knobs have been added to the store http://classicapi.com/catalog/index.php?cPath=23_184
-2 custom Elma 04 series rotary switches have been added to the store http://classicapi.com/catalog/index.php?cPath=51_133

7/6/2013 Update:
-New 15 and 18 pin card edge adapters for 500 and 51x prototyping have been added to the store. http://classicapi.com/catalog/index.php?cPath=87_88

1/8/2014 Update:
-553F EQ kits have been added to the store. http://classicapi.com/catalog/product_info.php?cPath=22_117_119_170&products_id=417
-500/51x Extension Jigs are now in stock http://classicapi.com/catalog/index.php?cPath=22_117_185
-Small one time batch of dual 10k pan pots have been listed http://classicapi.com/catalog/product_info.php?cPath=50_131&products_id=422

8/17/2014 Update:
Custom Crimson Ribbon Mic upgrade transformers! I added two variations of these some time ago but forgot to mention it here.....
-The 1:35 version. http://classicapi.com/catalog/product_info.php?cPath=21_186&products_id=414
-The 1:40 version. http://classicapi.com/catalog/product_info.php?cPath=21_186&products_id=415

10/11/2014 Update:
-VF600 discrete opamp blocks manufactured by Steve Firlotte of Inward Connections can now be purchased at the store http://classicapi.com/catalog/product_info.php?cPath=71_72&products_id=429

11/1/2014 Update:
-Fluted-Skirted Neve Presence knobs from Elma are now available at the store
http://classicapi.com/catalog/product_info.php?cPath=23_184&products_id=430
3/15/2015 Update:
-New Litz wire version of the 2503 has been added to the store
http://classicapi.com/catalog/product_info.php?products_id=437-New 2-Stage utility line amp cards have been added to the store
http://classicapi.com/catalog/product_info.php?products_id=438
5/3/2015 Update:
-4 new potentiometers added to the store. 2 different panpots as well as some other goodies!!
http://classicapi.com/catalog/index.php?cPath=50_131
6/17/2015 Update:
-Litz wire 2623-1's have been added to the store
http://classicapi.com/catalog/product_info.php?products_id=450

Hello Jeff ,
check links ,
seem that do not work properly ,
cheers

 

[qmp audio]

Hello Jeff ,
check links ,
seem that do not work properly ,
cheers

http://capi-gear.com^this amazing website has moved here.

 

[funkymonksf]

Will you be offering the preamp kits (in my case either the VP26 or 312) in the near future?

 

[Bertu]

Hi Jeff,
what is the way to buy the 2623-1-Litz Output Transformer from your site? It shows as 69 in stock, but there is no button to add it to a cart.

Thanks,
Bertu

 

[Ricardus]

Hi Jeff,
what is the way to buy the 2623-1-Litz Output Transformer from your site? It shows as 69 in stock, but there is no button to add it to a cart.

Thanks,
Bertu

Generally when that happens he is saving the items to sell in his full kit builds.

 

[jsteiger]

Hi Jeff,
what is the way to buy the 2623-1-Litz Output Transformer from your site? It shows as 69 in stock, but there is no button to add it to a cart.

Thanks,
Bertu

For the first time since mid 2020 we have a decent amount of stock so I have unhidden the buy button. Not sure how long it will last but hey!

 

[joshk34]

HI Jeff,

I know the world is still moving slow, but any ETA on when you might have more VP28 and BT50 kits in stock? Thanks!

 

[jsteiger]

HI Jeff,

I know the world is still moving slow, but any ETA on when you might have more VP28 and BT50 kits in stock? Thanks!

When I have release updates for our kits I post on our Facebook group.
CAPI Gear Store Stock Updates | Facebook

 

[JW]

I went to look for 10 packs of the CA 0252 on the site, but none available right now. I like how convenient they are to build a bunch of them, rather than sorting the single packs. Is it possible to get them this way again/soon?

 

[jsteiger]

I went to look for 10 packs of the CA 0252 on the site, but none available right now. I like how convenient they are to build a bunch of them, rather than sorting the single packs. Is it possible to get them this way again/soon?

Yes but they are at least a month out. We have to send transistors out to be put on tape. Its a small process.

 

[jsteiger]

CA-0252 10-packs are back in stock.

We also still have about ten 511 rack kits left from our last batch.

 

[oldskool1]

CA-0252 10-packs are back in stock.

We also still have about ten 511 rack kits left from our last batch.

Hi Jeff,

This is a copy of the email I sent directly to CAPI... I'm not sure which emails/forums are monitored. Thanks for the 511 kits. Everything good but I'm missing 2 short backplates (the 3 channel backplates with the printing on one side). Can I get those shipped out? Also, are there a few spares of the Phillips M3 screws in the kit? I stripped 2 of them even though I use a German Wiha screwdriver and adequate force. The screws are just real soft metal. If the kit has just enough for the build can you please throw in a few extras with the backplates... if there are spares in the kit we are good.

Thanks! My order number is 31576

 

[jsteiger]

Hi Jeff,

This is a copy of the email I sent directly to CAPI... I'm not sure which emails/forums are monitored. Thanks for the 511 kits. Everything good but I'm missing 2 short backplates (the 3 channel backplates with the printing on one side). Can I get those shipped out? Also, are there a few spares of the Phillips M3 screws in the kit? I stripped 2 of them even though I use a German Wiha screwdriver and adequate force. The screws are just real soft metal. If the kit has just enough for the build can you please throw in a few extras with the backplates... if there are spares in the kit we are good.

Thanks! My order number is 31576

Yeah I got it, replied and sent the 2 missing rear panels. Sorry for the error.

 

[klem]

Hi Jeff,
I sent you an email on 8/19 and DM'd here a few days later re: a few missing or damaged parts from order # 31621. Hope to hear from you, thanks.

 

[jsteiger]

Hi Jeff,
I sent you an email on 8/19 and DM'd here a few days later re: a few missing or damaged parts from order # 31621. Hope to hear from you, thanks.

Sorry we were off last week and slammed up to that point. Can you resend the email? I don't really have the bandwidth for DM's here.

 

[gar381]

NOTICE OF PART CHANGE

Had to happen sometime... The pnp BC560C has been out of production
for some time now and my current supply of NOS Fairchild BC560Cs
that I have been using for last 3 years is running very low. I will be using
the remainder of my supply for only for the matched pnp input pairs for the
garOA10 and gar918.

I knew this day was coming so I have auditioned many possibilities.
From now on I will only be using..

BC557C mouser # 637-BC557C in the following positions...

gar2520 Q6, Q9.
gar1731 Q3, Q4
garAM10 Q1,Q5,Q6,Q7
garOA10 Q2, Q3, Q5, Q7, Q9
gar918 Q3, Q4

Note that these are all on tape and will just drop in place to the silk
just like the original BC560C

Gary