I got some 34mm, dual diaphragm, edge-terminated chinese capsules here, and I gotta say they aren't exactly of the highest standard in craftsmanship: some of the diaphragms ripple a little near some of the screws holding the brass ring down, there's no holes for the capsule mount, and they didn't even bother to scrape off all of the extra diaphragm material after it was tensioned and clamped down.
These will eventually find their way into a C800 clone mic, a 6DJ8-based mic and probably a G7. I'll post the results in due time.
Peace,
Al.
These will eventually find their way into a C800 clone mic, a 6DJ8-based mic and probably a G7. I'll post the results in due time.
Peace,
Al.