Where to start... I have been retired from the Electronics business for the last 10 years or so... and have during this time designed, built and developed a lot of (mainly) Pro Audio Equipment... PA Amps, Guitar Amps, Mixers, Level Measurement devices... etc., etc...
I have also done some work with general electronics, power systems and RF (Radio) equipment.
However... I am now at the point of needing to (somewhat) back away from all of this as there are other priorities... and I am struggling with the time, stamina, and application required.
SO... I am now looking to engage with someone; or something; that might be interested in picking up my pursuits... either privately or commercially.
I am very much open as to how this might happen... I have an extensive inventory of schematics, designs, PCB's, parts, and the like.
If this is of interest to you please message me and I am happy to give you my mobile number and/or email address for further discussions.
A few (of many) random pics attached as a general guide to the sort of stuff I have been doing.
BTW... I am based in Perth, Western Australia. Someone local would be preferred, but, with the technology that we have available nowadays more distant options would likely be feasible.
A few (of many) pics of my projects are attached FYI and comments / queries.
Thanks,
Graham
I have also done some work with general electronics, power systems and RF (Radio) equipment.
However... I am now at the point of needing to (somewhat) back away from all of this as there are other priorities... and I am struggling with the time, stamina, and application required.
SO... I am now looking to engage with someone; or something; that might be interested in picking up my pursuits... either privately or commercially.
I am very much open as to how this might happen... I have an extensive inventory of schematics, designs, PCB's, parts, and the like.
If this is of interest to you please message me and I am happy to give you my mobile number and/or email address for further discussions.
A few (of many) random pics attached as a general guide to the sort of stuff I have been doing.
BTW... I am based in Perth, Western Australia. Someone local would be preferred, but, with the technology that we have available nowadays more distant options would likely be feasible.
A few (of many) pics of my projects are attached FYI and comments / queries.
Thanks,
Graham
Attachments
-
PXL_20240809_092410212.MP.jpg268.8 KB · Views: 0
-
20210301_173551.jpg1.5 MB · Views: 0
-
2RU Amp Front Panel.jpg1.9 MB · Views: 0
-
20180809_141703.jpg3.5 MB · Views: 0
-
20210101_142932.jpg1.6 MB · Views: 0
-
20220609_150707 (002).jpg1.4 MB · Views: 0
-
PXL_20230904_084448629.jpg433.5 KB · Views: 0
-
20180702_160712.jpg496.2 KB · Views: 0