D&R 8000 - PSU Issue

[smilan]

Hi,
I have a D&R 8000 console that I'm restoring.
The PSU that I have is not an original, but it's a clone of the original one (built by / for the former owner).
After recap the PSU I have the +/- 24V and +/-15V rails working.
On the +48V rail I have only 24V.
The AC supply for both diode bridges is 28 VAC.
Attach a schematic of the PSU with the voltages I've measured.
I need some help to troubleshoot this issue.

 

[smilan]

I found the problem, one of the legs of the diode bridge was broken, with a new bridge I have the 48V rail working as it should