the shadow
New member
- Joined
- Sep 21, 2011
- Messages
- 1
Hi,
I've been working on a Digidesign Procontrol that has an intermittent problem with the display freaking out( all displays start glitching and relays are clicking but the automation and audio are not affected). A few months ago I resoldered all the power supply connectors and things were fine until a few weeks ago. Now when the displays act up if you hit the test mode button it clears up the problem for about ten or fifteen minutes. I'm wondering if anyone has experienced this and if the only solution is to replace the supplies. Any help or suggestions would be greatly appreciated. Thanks.
I've been working on a Digidesign Procontrol that has an intermittent problem with the display freaking out( all displays start glitching and relays are clicking but the automation and audio are not affected). A few months ago I resoldered all the power supply connectors and things were fine until a few weeks ago. Now when the displays act up if you hit the test mode button it clears up the problem for about ten or fifteen minutes. I'm wondering if anyone has experienced this and if the only solution is to replace the supplies. Any help or suggestions would be greatly appreciated. Thanks.
