I am just wiring up a bunch of faders, but for some reason they have more wires than I would expect.
They are P&G 3000 Series, exact type is 3220.
I have the wiring diagramm, according to the manual, attached.
Red feeds the signal into the fader
Yellow is the wiper "output"
Green goes to 0V
Black goes to chassis ground
But what the hell am i doing with the blue wire?
Any ideas?
They are P&G 3000 Series, exact type is 3220.
I have the wiring diagramm, according to the manual, attached.
Red feeds the signal into the fader
Yellow is the wiper "output"
Green goes to 0V
Black goes to chassis ground
But what the hell am i doing with the blue wire?
Any ideas?