Wanted FOUND: Urei rack ear

[Golgoth]

Hi, I am looking for one UREI type rack ear like these

Thanks!
G

 

[sahib]

I should have a pair but unpainted. If ok, I'll check and report back.

 

[Golgoth]

I should have a pair but unpainted. If ok, I'll check and report back.

Thanks Sahib! I could paint them myself no problem, let me know!

 

[sahib]

Turned out I have two pairs. Just to double check I have put the important dimensions.

 

[MidnightArrakis]

Hi, I am looking for one UREI type rack ear like these

Thanks!
G

View attachment 141034

[I am looking for one UREI type rack ear like these] -- I don't see that there is, or has been, any resolution to your UREI question. So, in that case, should you be so inclined.....you could have a pair of these rack-ears fabricated by a local sheet-metal shop using the CAD-model of the rack-ears I have created and shown here. I created this CAD-model of the UREI rack-ears using the dimensions provide by -- sahib -- along with some of my own rack-equipment design knowledge. This is just what I do!!!

Depending upon the sheet-metal shop's capabilities, they could either directly import my CAD-model file or, if they don't have that capability, I could create a standard "Sheet-Metal Mechanical Detail Fabrication Drawing" PDF-file for them to work from. Since you are located in France, I am unable to recommend any sheet-metal shops that can directly import a CAD-design file and then be able to spit-out a sheet-metal part as I could do for you here in the U.S.A.

Let me know if you have already obtained these rack-ears for your need or if you still need to obtain them for your project.







>> NOTE: The main difference between the actual UREI rack-ear and the one that I have created here is.....the UREI rack-ear was fabricated from a section of 25.4mm X 25.4mm aluminum extrusion, which gives it the sharp 90-degree inside angle, whereas my rack-ear will be fabricated from a flat-piece of aluminum sheet-stock and then -- bent -- to create the 90-degree angle. It is due to the bending process that the inside angle has a small radius. That's just how things are!!!

You can PM me, if you wish.

/

 

[sahib]

I don't see that there is, or has been, any resolution to your UREI question.....

He's been sorted. Using the pair I supplied.

 

[Golgoth]

[
View attachment 143212
[I am looking for one UREI type rack ear like these] -- I don't see that there is, or has been, any resolution to your UREI question. So, in that case, should you be so inclined.....you could have a pair of these rack-ears fabricated by a local sheet-metal shop using the CAD-model of the rack-ears I have created and shown here. I created this CAD-model of the UREI rack-ears using the dimensions provide by -- sahib -- along with some of my own rack-equipment design knowledge. This is just what I do!!!
Depending upon the sheet-metal shop's capabilities, they could either directly import my CAD-model file or, if they don't have that capability, I could create a standard "Sheet-Metal Mechanical Detail Fabrication Drawing" PDF-file for them to work from. Since you are located in France, I am unable to recommend any sheet-metal shops that can directly import a CAD-design file and then be able to spit-out a sheet-metal part as I could do for you here in the U.S.A.
Let me know if you have already obtained these rack-ears for your need or if you still need to obtain them for your project.
View attachment 143213
View attachment 143214
View attachment 143215
View attachment 143216

>> NOTE: The main difference between the actual UREI rack-ear and the one that I have created here is.....the UREI rack-ear was fabricated from a section of 25.4mm X 25.4mm aluminum extrusion, which gives it the sharp 90-degree inside angle, whereas my rack-ear will be fabricated from a flat-piece of aluminum sheet-stock and then -- bent -- to create the 90-degree angle. It is due to the bending process that the inside angle has a small radius. That's just how things are!!!

You can PM me, if you wish.

/

Thanks a lot for chiming in, as @sahib said we sort we sorted it out together