NovaPA
Well-known member
Hello.
I own a large number (about 60pcs) or such boards by coincidence.
There are PCBs with placing for 8 jack 6.3 connectrs.
This PCBs may be used when you need to put any number of jacks on the back (or front) panel of your device, but don't want to mount these directly, need PCB to make it firmly.
Layout of those PCBs lets weld flexi wires or to use it as passive adder.
so... I see, i described it not the best way, look at the photo better
Offer (scroll down)
I own a large number (about 60pcs) or such boards by coincidence.
There are PCBs with placing for 8 jack 6.3 connectrs.
This PCBs may be used when you need to put any number of jacks on the back (or front) panel of your device, but don't want to mount these directly, need PCB to make it firmly.
Layout of those PCBs lets weld flexi wires or to use it as passive adder.
so... I see, i described it not the best way, look at the photo better
Offer (scroll down)