dirty1_1garry
Well-known member
Well. I'm selling LA-2A classical levelling amplifier based on DRIP Electronics OPTO4 pcb with two opto cells - slow (traditional) and fast (slightly more aggressive).
Build with “hi-end” ideas in mind and contain:
original vintage UTC A10 & UTC A24 audio transformers
resistors - almost all carbon film Vishay, Amtrans
power filter capacitor - Jensen
signal capacitors - Mallory 150’s + TAD Silver Mica
output capacitor - Jensen PIO
Alps reduction and output potentiometers
Drip opto cells
power transformer - Hammond 369JX (both 220V & 110V mains)
TUNG_SOL 12AX7, EH 12BH7, RCA 6BQ5 Tubes.
Nice and beautiful custom build case.
Unit was build in december of 2012 and was used on hundreds records. I’m selling it because want to build my own version with some changes.
Price -1500usd new price 1399usd +shipping
Worldwide shipping (about 60-100$ depends on region)
You could hear fresh samples (ProTools session) compared with UA reissue here:
https://yadi.sk/d/Scow_VhUfyxKH
And watch the video comparison test here:
http://www.youtube.com/watch?v=v2N7gr5uXhA
Build with “hi-end” ideas in mind and contain:
original vintage UTC A10 & UTC A24 audio transformers
resistors - almost all carbon film Vishay, Amtrans
power filter capacitor - Jensen
signal capacitors - Mallory 150’s + TAD Silver Mica
output capacitor - Jensen PIO
Alps reduction and output potentiometers
Drip opto cells
power transformer - Hammond 369JX (both 220V & 110V mains)
TUNG_SOL 12AX7, EH 12BH7, RCA 6BQ5 Tubes.
Nice and beautiful custom build case.
Unit was build in december of 2012 and was used on hundreds records. I’m selling it because want to build my own version with some changes.
Price -
Worldwide shipping (about 60-100$ depends on region)
You could hear fresh samples (ProTools session) compared with UA reissue here:
https://yadi.sk/d/Scow_VhUfyxKH
And watch the video comparison test here:
http://www.youtube.com/watch?v=v2N7gr5uXhA