• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FS: LA-2A based on Drip Opto4 with UTC iron (new price)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dirty1_1garry

Well-known member
Joined
Oct 3, 2011
Messages
511
Location
Moscow
Well. I'm selling LA-2A classical levelling amplifier based on DRIP Electronics OPTO4 pcb with two opto cells - slow (traditional) and fast (slightly more aggressive).

47634-140415190900.jpeg


Build with “hi-end” ideas in mind :p and contain:
original vintage UTC A10 & UTC A24 audio transformers
resistors - almost all carbon film Vishay, Amtrans
power filter capacitor - Jensen
signal capacitors - Mallory 150’s + TAD Silver Mica
output capacitor - Jensen PIO
Alps  reduction and output potentiometers
Drip opto cells
power transformer - Hammond 369JX (both 220V & 110V mains)
TUNG_SOL 12AX7, EH 12BH7, RCA 6BQ5 Tubes.
Nice and beautiful custom build case.

Unit was build in december of 2012 and was used on hundreds records. I’m selling it because want to build my own version with some changes.
Price - 1500usd new price 1399usd +shipping
Worldwide shipping (about 60-100$ depends on region)

You could hear fresh samples (ProTools session) compared with UA reissue here:
https://yadi.sk/d/Scow_VhUfyxKH
And watch the video comparison test here:
http://www.youtube.com/watch?v=v2N7gr5uXhA

47634-140415191152.jpeg

47634-140415191230.jpeg

47634-140415191305.jpeg

47634-140415191339.jpeg

47634-140415191426.jpeg
 
Back
Top