FS: Line Receiver/Debalancing-Boards

[culteousness1]

Hi all,

during my last build, I was needing a simple Line Receiver/Debalancing-Board.
Therefore, I had these boards made and want to sell my spares:

These accept either a INA134 (G=1) or a INA137 (G=1/2). Just add four bypass caps
and a screw terminal and you are done.

Board size is 32x26 mm, single sided. Note that I used all SMT components. But these
are anly SOIC8, 6032, 0805. So pretty easy to solder. Maybe a good practice or start 

They are attached directly under the XLR and Pin 1 can be connected either to CHS or
to GND by a solder jumper.

I have ten of these available. Price is 3 Euros each. International Shipping costs 3 Euros.
If you have any question, please do not hesitate to shoot me a PM.

Cheers,
Carsten

 

[culteousness1]

BUMP  8)

 

[delaymix]

PM

 

[culteousness1]

All boards are on their way to Spain, but I am open for a new run.

Just some additional info:

- accepts pin compatible ICs, like THAT-1240 series
- several gain settings are possible (0 dB, -3 dB, -6 dB)
- wide application range

Questions are always welcome!

Best,
Carsten

 

[culteousness1]

Got some spares available, again.  All info from the
opening post is still applicable.

THT version is available too but needs verification.

Stay tuned,
Carsten

 

[culteousness1]

THT Version is tested and available now:

Cheers,
Carsten

 

[culteousness1]

Weekend BUMP 

 

[culteousness1]

X-Mas BUMP...

 

[culteousness1]

El BUMPO  8)

 

[culteousness1]

BUMP for the last few boards...