• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FS: Stereo Compressors

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

druu

Well-known member
Joined
Jan 13, 2012
Messages
348
Location
Perth, Australia
I have for sale three left over compressors from my mastering rack:

Dual ‘Analag’ Optical Tube Mastering Compressor (240V) - SOLD
- 2RU Chassis with custom laser etched front panel
- Fully stepped 23 step Input Gain, Compression & Output Gain Controls - Dual Ganged
- Adjustable slope characteristics from ‘Soft’ to ‘Hard’, activated by ‘Limiter’ toggle switch
- Stereo Nissei TN-73 VU meters, selectable for Gain Reduction or +4 Output
- Stereo Link toggle switch
- All high quality components
- Lundahl LL1540 Input (1:4) and Output [reversed] (4:1) transformers
- Six (6) JJ Tubes, 2x 12AT7 & 4x 12AU7

Serpent Audio SB4000 Stereo Buss Compressor (240V) - SOLD
- 1RU Chassis with silkscreened front panel
- Threshold -20 dB to +20 dB
- Ratio 2:1, 4:1, 10:1
- Gain 0 dB to +20 dB
- All high quality components
- THAT 2181B for audio and side-chain
- Fully balanced I/O
- Quad VCA Boards installed for further noise reduction
- Hardware relay bypass

PICO Stereo Edition II Mastering Compressor (100-240V) - SOLD
- Original Roger Foote circuit design
- 1RU Chassis with custom laser etched front panel – need redoing with new scales
- Threshold -8 dB to +15 dB (stepped control)
- Ratio 1:1 to 4:1 (stepped control)
- Gain -10 dB to +10 dB (stepped control)
- HPF mode enables a high pass filter -6 dB @ 100Hz
- Various timing modes, RMS, manual A/R and Non-Linear mode
- LED metering for fast display of gain reduction
- Fully balanced audio I/O
- External MeanWell 100-240V PSU (IEC socket) for low noise

Buyer to pay shipping and PayPal fees. AUD only.

MHS_4625.jpg


MHS_4631.jpg
 
If you still have the pico in a couple of weeks I might be keen to pick it up. Am in AU also
 
Back
Top