G-Pultec BOM?
- Thread starter jwhmca
- Start date
Help Support GroupDIY Audio Forum:
MikoKensington
Well-known member
Just emailed one to you. It's from 2004, so some parts, like the inductors, may be obsolete now.
snipsnip
Well-known member
there isnt much in this project, so i think most people just look at the boards and order.
The things that frustrated me:
1. I question everything/part... Like "will this cap work... what will it sound like?"
2. You find a cap/inductor type that someone likes or is using, then you find that every value is available except 1 or 2!
3. So the whole process starts over... Find something someone like... try to order... they don't make one of the Values...
4. ERRGG
1. I question everything/part... Like "will this cap work... what will it sound like?"
2. You find a cap/inductor type that someone likes or is using, then you find that every value is available except 1 or 2!
3. So the whole process starts over... Find something someone like... try to order... they don't make one of the Values...
4. ERRGG
jwhmca said:
The biggest restriction you may be facing with this build could be PC Board/part alignment and general real estate. I'm not sure how easy & open it will be for mounting the inductor. If you aren't restricted there it opens up the sowter and cinemag coils. I believe they sell one at don audio as well. Then just recalculate for the needed cap value. So some flexibility there. Sometimes it's necessary to parallel caps which may be tricky on a PCB. The Wima types unfortunately don't lend themselves to easy // lead ties.
migidee said:
I've never used fastron. I've used both the sowter and cinemag in a pair of p to p clones and they both sound/perform very good. So far I can't say that I can hear any substantial differences in tone between the two.
The price difference may reflect mu can shielding. The Cinemags don't use a mu can. I haven't had any problems related to lack of can shielding so far. I also used an external PS. If your PT is going to be mounted inside the chassis I suppose it's worth checking around to see if anyone else has had field pickup issues with unpotted inductors. I don't recall ever reading of any cases of this.
yes I was planning on mounting the PT in the case, and one of my biggest concerns was flux bleeding through. Thats why I was asking. I suppose the fastrons are cheap enough to buy and if I am not happy with them I could always upgrade to the sowter or cinemag later.
frazzman
Well-known member
Could someone please post up the BOM as I'm looking at getting started on this project also
leitrim_lad
Well-known member
+1 on the BOM also
Thanks a million
Thanks a million
culteousness1
Well-known member
any news on this?
i am also looking for a bom. didn't find one in the meta.
maybe somebody would like to share.
i am also looking for a bom. didn't find one in the meta.
maybe somebody would like to share.
kepeb
Well-known member
concur. i should have a board soon so it would be handy 
another here looking for a BOM,
kepeb
Well-known member
may as well wait for the ones with the right footprint if your doing a mouser or ordering BOM for g-pultec.
i actually dont have clear values even, lots of conflicting lists that i dont remember where i got.
what are you working from?
i actually dont have clear values even, lots of conflicting lists that i dont remember where i got.
what are you working from?
funkymonksf
Well-known member
Anyone? I could use one too
Neily
Well-known member
Bump.
I need this BOM too.
I need this BOM too.
funkymonksf
Well-known member
I find it so odd that no one will or can post a bom. It'd be so helpful. I am sure it'd be easy enough to find values, but what about lead spacing? which switches fit the pcb and what not. Jacob? Do you have one you could post? Anyone?
Much appreciated,
Brice
Much appreciated,
Brice
