capnspoony
Well-known member
Hi all
I've just completed my first G9 and as I have expected I also have my first real problems.
They seem to be related.
When my gain lorlin is turned down from positions 1-4 it will clip over and over again at about 80bps .. when turned to position it sounds like I have a serious grounding problem .. when turned up further than that signal passes through fine but my gain does not increase or decrease.
My output pot also seems to do nothing. I have checked the pinout on that and I have it wired correctly.
Any help would be greatly appreciated so I can get my first pre up and running!
Richie
I've just completed my first G9 and as I have expected I also have my first real problems.
They seem to be related.
When my gain lorlin is turned down from positions 1-4 it will clip over and over again at about 80bps .. when turned to position it sounds like I have a serious grounding problem .. when turned up further than that signal passes through fine but my gain does not increase or decrease.
My output pot also seems to do nothing. I have checked the pinout on that and I have it wired correctly.
Any help would be greatly appreciated so I can get my first pre up and running!
Richie