Aitd
New member
Hey! I just got a pair of Filtek/BFE MK3a EQ’s… they were already racked up and had a power connection for a 24V wall wart. The EQ sounds incredible… however there is a very noticeable 60hz buzz…. If I take an alligator clip and connect the unit to a screw in a rack rails etc the tone stops completely… so there is clearly a basic grounding issue. I’m a producer/mixer and although I’m pretty knowledgeable and can sort most issues and solder well I am not a tech
How do I go about grounding this internally within its own rack? without having to ground it to something externally like a rack rail etc. I’m sure there’s a very basic answer to this…
Photos and the only schematics I could find attached here.
Thanks!
How do I go about grounding this internally within its own rack? without having to ground it to something externally like a rack rail etc. I’m sure there’s a very basic answer to this…
Photos and the only schematics I could find attached here.
Thanks!
Attachments
-
62E20CC4-EE6F-49B7-BA7D-BCEC00DC7CCB.jpeg1.6 MB · Views: 1
-
6B4A155C-8A81-4EF5-80EB-457EE6310977.jpeg1.4 MB · Views: 1
-
DB1D296F-02E9-4131-9380-A50CEA7EAE24.jpeg1.7 MB · Views: 1
-
D3B0B66A-62F4-4A7E-8116-D8F4127E92CC.jpeg162.3 KB · Views: 1
-
D7AE4429-30D1-46E0-952B-397F7B94AC57.jpeg183.3 KB · Views: 1
-
9A7F47AD-5552-4C71-BF75-C24520E5B011.jpeg150.2 KB · Views: 1
Last edited: