groupDIY 500 series mechanical specifications

[alphasnk]

[I got diagnosed with bipolarity disorder last year] -- I'm sorry to hear about that!!! And, please do take care, OK??? A good engineer friend of mine also had a "bipolar disorder" and he had a really tough time controlling himself, even to the point that he had decided to commit suicide while driving his car.....WITH ME IN IT!!! ..... He ended up being successful in his endeavor a few years later.

GOOD LUCK!!!

/

Don't worry i don't drive Thank you for sharing your experience. It tells everything.

 

[sahib]

...... As of yet, I have never seen any mechanical detail drawings showing this specific side-view aspect of the edge-connector to PCB-edge dimensions. THIS is a first!!! THANK YOU!!! for sharing this view and their dimensions!!!

They are not their dimensions. They are the dimensions that I worked out which only require a little attention.

If there is to be a "GroupDIY '500-Series' Format Standard", then every last friggin' and minute detail needs to be specifically defined.

There is already GDIY 51x format which differs from the VPR format that it is 11 slots wide with added + - 24V operation. I now have given all the critical dimensions. The rest is utterly unimportant and left to the manufacturer as long as the final end product rack fits in a standard 19" format cabinet.

I also believe that -- possibly -- due to the large worldwide customer base that this GroupDIY forum represents, having the lot of all of us coming up with "a settled upon and a collectively ratified set of electrical-details and mechanical-design dimensional criteria and parameters".....just -- might -- persuade all of the "BIG BOY COMPANIES" to modify their so-called standards and instead adopt what it is that we all have come up with!!! At least.....we can "dream", can't we???

/

No limits in dreaming, but if you think API or Radial are going to read this thread and change their products, then you are being naïve.

With my previous post I now have given all the critical dimensions. As for the electrical specifications, again the card edge pin configuration is already there.

However, you are of course free to design your own version.

 

[MidnightArrakis]

They are not their dimensions. They are the dimensions that I worked out which only require a little attention.

There is already GDIY 51x format which differs from the VPR format that it is 11 slots wide with added + - 24V operation. I now have given all the critical dimensions and the rest is utterly unimportant and left to the manufacturer as long as the final end product rack fits in a standard 19" format cabinet.

No limits in dreaming, but if you think API or Radial are going to read this thread and change their product, then you are being naïve.

[if you think API or Radial are going to read this thread and change their product, then you are being naïve] -- Something you don't know.....I once worked at the same concert sound-reinforcement company as the president of API, Inc. also once did, during the same time-period. And.....I also have his personal e-mail address.

You never know.....ya know?!?!?!?!?

/

 

[sahib]

Good for you. Go for it.

 

[JMan]

Perhaps I am confused, or perhaps there are some crossed wires happening in this discussion.

Are we talking about establishing dimensional standards for a 500 module, or a chassis?