maxheadroom
Well-known member
when you have a current consumption of 160mA you can use the 10VA at 24V.
i am currently building on my single channel jfp preamp. my first issue got
a problem on high level inputs, sounds like motor boating.
next i will try a different supply for the two stages and a feedback resistor between output (before output cap) and input, maybe 100k.
for input and output i use OEPs.
i had a toriod with 15VA. its a little bit oversized for one channel.
what board or layout do you use?
i am currently building on my single channel jfp preamp. my first issue got
a problem on high level inputs, sounds like motor boating.
next i will try a different supply for the two stages and a feedback resistor between output (before output cap) and input, maybe 100k.
for input and output i use OEPs.
i had a toriod with 15VA. its a little bit oversized for one channel.
what board or layout do you use?