Hello From New England

[shoetique]

I've been lurking around these forums for quite awhile and building a ton of different projects. I make YouTube videos on a lot of them in hopes that it will get other folks into the hobby! I'm going to build a 660 next - may god have mercy on my soul!

 

[Barry Hufker]

Welcome to the forum!

 

[TimG]

You have a much higher chance of 660 success with the group here. Welcome.

 

[shoetique]

Don't I know it Tim!

I'm toying with the idea of using a Drip PCB for this one. My understanding is the latest revisions don't have the issues some of the earlier ones have. I recently did a point to point MEQ and wanted to follow up with a PCB project before going back to more point to point.

 

[TimG]

There is a reputation here for Drip’s lack of support, but a lots of sympathizers to your position.
You will find entirely scratch built 660s here!!!!

 

[shoetique]

There is a reputation here for Drip’s lack of support, but a lots of sympathizers to your position.
You will find entirely scratch built 660s here!!!!

Very true. I was able to get the BOM/Build Guide up front for the 660 so I feel a little better about this round. I previously did an EQP-1 which took a long time to get that info for.

 

[thakava]

Very true. I was able to get the BOM/Build Guide up front for the 660 so I feel a little better about this round. I previously did an EQP-1 which took a long time to get that info for.

Hi!

Could you PM me it... Been waiting and waiting for the buildguide, I have the BOM... Thanks!

 

[shoetique]

For anyone who stumbles upon this later - the document I have is actually the BOM, not the build guide. The build guide is still ‘being worked on’ by Drip.

I plan on doing a comprehensive over view of this build once I’m done to help anyone who decides to embark on this project.