Help Identifying SMD Inductors

[FPALB]

My Dscope M1 Analyzer was acting funny and so i ran a loop test and ChA failed unfortunately. I popped open the hood and found these 2 inductors on the front end of the analyzer input to be damaged (the wrapped wire is frayed and im pretty certain i see breakage). Hard to see in the pictures, but they seem to be 4 pin devices. No markings that I can identify. I would love to overnight these if possible, but I dont know much on how to identify inductors. There is a second channel with identical inductors so i can measure those if needed.

Any help would be appreciated!

View attachment IMG_0002.JPG

 

[JohnRoberts]

Try to measure the good ones, then look to see what is available for sale.

JR