Help to find encoder / incrementer!!!!

[SaMpLeGoD]

Hello all,

I'm repairing a BOSS DD-20 and need urgent a encoder / Incrementer with push on switch that I just don't know where to buy...
The reference written on the pot is 202N2...
I counted 20 steps in 360º and I have no more information about it
I found this Alps encoder on Farnell but I really don't know waht they mean for 30 det 15ppr...????
Below is the images from de BOSS DD-20 with the pot signed, and the pot (incrementer) itself... (broken)
Any help is apretiated!!!

Broken Encoder

Where in DD-20

Thanks a loootttttt

 

[12volts]

Start looking in the Farnell 'on line catalogue'. Book one, page 1420.

Frank B.

 

[SaMpLeGoD]

Start looking in the Farnell 'on line catalogue'. Book one, page 1420.

Frank B.

Hello Frank, thanks for replying!
I already found the incrementers location on Farnell... the question is: I don't know wich values the incrementer should have... or, if there is any equivalent on Farnell's website...
Thanks!

 

[SaMpLeGoD]

Does Anyone have the DD-20's Service Manual?
Cheers!

 

[SaMpLeGoD]

No one??

 

[radardoug]

That Farnell encoder has 30 little detents(clicks) per revolution, and puts out 15 pulses per revolution.
So it will probably work fine for you. Its a typical encoder, they are all pretty much the same.

 

[SaMpLeGoD]

Hey Thanks a lot Radardoug!!!!!
Cheers!!