So I hooked up the scope to the clock signal on the Alesis BRC remote ,
first I was able to look at the BNC output ,then the Adat sync clocksource ,
results with the Tek 2215 were good , a nice clear trace ,
BNC out shows some overshoot and resonance on the leading edge positive peak ,
Adat clock looked a little better , but still had the little squiggle on the waveform ,
Of course I forgot terminate the outputs , that might explain the slightly poor looking waveforms .
I'll have another go tomorrow in the light of day .
first I was able to look at the BNC output ,then the Adat sync clocksource ,
results with the Tek 2215 were good , a nice clear trace ,
BNC out shows some overshoot and resonance on the leading edge positive peak ,
Adat clock looked a little better , but still had the little squiggle on the waveform ,
Of course I forgot terminate the outputs , that might explain the slightly poor looking waveforms .
I'll have another go tomorrow in the light of day .