Hum problems on new G1176 Prototype. please help.

Adky

Well-known member
Joined
Jun 14, 2004
Messages
175
Reaction score
3
Location
Hong Kong
I am having a hum issue (unknown if it is a ground hum) when the output is turned to 2 or 3 o'clock the hum is not audible, but anything over is a problem. is this normal for G1176's? The unit does not have an input transformer, but does this make a difference? the circutry has an input transformer, but the circut is open. I also can not locat a 4M7 trim pot for the release, ( I used 2x 2M daisy chain ) so is there anything that i can use to substitute? if not, what other options are there?
Thank!!!!
 

Rob Flinn

Well-known member
Joined
Jun 3, 2004
Messages
4,444
Reaction score
73
Location
Sussex, UK
for 4m7 pots check this thread
http://www.groupdiy.com/index.php?topic=2996&highlight=4m7&sid=5ce76df578d93343e6f6e22ff41a78ce
 

Adky

Well-known member
Joined
Jun 14, 2004
Messages
175
Reaction score
3
Location
Hong Kong
Thanks!!!
Mat:
Can you please direct me to the thread?
Is pretty hard to find and I think I got lost in the jungle :cry:
Thanks again!!!
 

Adky

Well-known member
Joined
Jun 14, 2004
Messages
175
Reaction score
3
Location
Hong Kong
I performed the " TRACE CUT " and Installed a Fat Ground Cable ,, Now I can Have it Crank-up about 3 or 4 O'Clock Position
BTW: the Monitor are actually pretty Loud :grin:
VERY THANKSFULL
I will Post Pict Later On-----THANKS AGAIN GUYS
 
Top