IC orientation for SSL Comp

[matta]

Hey Guys,

I have a TI TL074 for my SSL that looks like the one below.

I am a little confused as to it's orientation as it has both a notch and a dot, similar to the NE5532, which have the dot to indicate pin 1, and no notch.

Looking at the Datasheet it would appear that the notch on this chip indicates Pin 1 on the left and Pin 14 on the right, if the notch is facing the 1000uF PSU caps on the board, which is the correct orientation.

Please confirm with me if my theory is correct or not, I'd hate to blow it up :green:

Cheers

Matt

 

[adamasd]

The U shapped gab is the top.

adam

 

[matta]

Thanks,

Power up, no explosions, all good ;-)
Voltages see good as well.

Cheers

Matt