Input jack on the G9

[Soeren_DK]

A dummy question again... sorry :wink: :sam:

Whitch wire should be mounted on jack in the front and how?

wires: From, To and Ground but only 2 terminals on the input jack...?

 

[pucho812]

sounds like you have an unbalanced jack. is it 1/4"? doesn't sound like XLR.

 

[pucho812]

off of my head I would think you handle it like most unblancfed to balanced connections. On the unbalanced jack the tip should be hot(+) and the Sleve should be a combination of the cold(-) and ground tied together. and then just do standard balanced on the other end.

 

[Soeren_DK]

The jack is comming from the control PCB in the front....
Should it be a balanced jackinput?

 

[gyraf]

Hi Søren,

No.

The front panel jack is - as it says - a high impedance instrument input. These are never balanced.

You will need a mono jack that is switching, that is, an integrated switch that opens when a jack is inserted.

Three wires gors to the jack. 1) to the jack tip switch, 2) from the jack tip, and 3) ground.

Look at the schematic and the overlay pdf for reference.

Jakob E.

 

[Soeren_DK]

Ahhh... Thanks jakob.. hehe...

The jackinput is the ones i have on my guitarpedals... :thumb:

That was a little tricky..... :sam: :guinness: :sam: