JLM FET DI cap orientation

[substitute]

On the board for the JLM FET DI, the solder pads are labeled 50v and BP, I'm only familiar with +/-.  If some one could straighten this out for me with maybe a little explanation as to what those designations mean I sure would appreciate it.

THANKS

 

[substitute]

from B3groover over yonder at TapeOp...

BP means bi-polar, as in a bi-polar electrolytic. It will work either way, since there is no set positive / negative lead. Hence "bi-polar"!

Confused me the first time, too! Smile

 

[G-Sun]

Thanks! Exactly my question as well