G
Guest
Guest
finished and built this pcb layout , the only problem is that
i have had to replace
r34(10k2w) to a 68k 2w
r35(220k) to a 1meg
the 6aq5a kept showing voltages of above 200v
( i reviewed the layout a million times , but in my connect the dots
puzzle , everything looks correct.)
r33(220k) to a 180k
then, all the voltages fell into place(or at least near or inbetween
the reissue voltages , and the dave " error filled book" jhansen
chart.
sounds great (or nice and juicy if you prefer)
/ as good as my UA reissue and the pile of other la-2a
p2p Clones that ive built,
but i am worried that the voltages being so high after r34/r35
that i have done something wrong.
much apreciated if anyone had any tips , suggestions or ideas
on improving .
or obviouse fatal errors .
im just trying to turn this from the "burn the house down"-2a
to the la2a pcb .
aka. the ghetto compressor or the g-unit 2a, heh :grin:
oh and ill apologize for the image size now / me and photoshop
are having relationship problems.
thanks in advance/
driller45