bernatvm
Well-known member
Recently bought a second hand PCM 70 and I have some problems with the output. I only get the left side to output sound and only when cables are plugged both to L and R outputs. This happens whenever the unit is in bypass or not.
The manual says that when only one of the two outputs is connected signals are summed, but in my case I need both cables to get sound out of it. Sounds like bad connector, but I don't know. Anyone had this problem before?
I checked different cables, bal and unbal, and always same behaviour. Service manual attached.
The manual says that when only one of the two outputs is connected signals are summed, but in my case I need both cables to get sound out of it. Sounds like bad connector, but I don't know. Anyone had this problem before?
I checked different cables, bal and unbal, and always same behaviour. Service manual attached.