Hi, I'm looking for someone who can rewind a broken filter inductor from an EQ module.
The inductor is quite small and has a 14x8,5mm pot core. The wire seems to be somewhere between 0,03 and 0,05mm.
As I have another unit with an intact inductor I measured the DC resistance which is about 3800 Ohm.
Anybody out there that can wind such small diameter wire? It has no taps or anything so just "simple" start to finish winding.
The inductor is quite small and has a 14x8,5mm pot core. The wire seems to be somewhere between 0,03 and 0,05mm.
As I have another unit with an intact inductor I measured the DC resistance which is about 3800 Ohm.
Anybody out there that can wind such small diameter wire? It has no taps or anything so just "simple" start to finish winding.
