volta
Well-known member
- Joined
- Dec 10, 2004
- Messages
- 118
Does the phase coming out of the secondaries matter when wiring a bi polar power supply such as this?+/-15v
The center tap of course goes to ground but how do you determine the phase of the secondary voltage referenced to ground?
In other words if you swap the leads on each side of the center tap coming out of the secondaries will the circuit still work?
1/2hz later?
Or smoke?
:shock:
I have a transformer with a black wire for center tap and two violet wires are 15vac each on the secondary. :grin:
The center tap of course goes to ground but how do you determine the phase of the secondary voltage referenced to ground?
In other words if you swap the leads on each side of the center tap coming out of the secondaries will the circuit still work?
1/2hz later?
Or smoke?
:shock:
I have a transformer with a black wire for center tap and two violet wires are 15vac each on the secondary. :grin: