Mci jh110 capstan rebuild

[bmaughan]

Hi everyone. Just curious if anyone has experience rebuilding the capstan motor on a jh110. I should probably rephrase. I wouldn’t be doing a full rebuild..just replacing bearings. The machine has almost no hours on it but I believe some water got under the deck and messed with the capstan bearings.

Any tips/advice/documentation would be awesome!

 

[Rob Flinn]

There is a facebook group for MCI tape decks, you may find more help there perhaps.

https://www.facebook.com/groups/606802176131000

 

[guy_4]

Hello Rob,

I had two JH110 / 1inch Capstan Motors rebuilt a few years ago by Thomas " Tom " RAPPOLT, of AMP Services, in Florida.
He did a perfect job on both, replacing the bearings and full testing.
I can highly recommend him.

www.audiomagnetics.com
tomampservices.com
561-333-0335


Best,
Guy

 

[Rob Flinn]

Hello Rob,

I had two JH110 / 1inch Capstan Motors rebuilt a few years ago by Thomas " Tom " RAPPOLT, of AMP Services, in Florida.
He did a perfect job on both, replacing the bearings and full testing.
I can highly recommend him.

www.audiomagnetics.com
tomampservices.com
561-333-0335


Best,
Guy

You probably addressed this to the wrong person. I was responding to the thread starter. I don't own mci tape decks.

 

[guy_4]

You probably addressed this to the wrong person. I was responding to the thread starter. I don't own mci tape decks.

OUPS ! my bad...:-(
Sorry Rob for the mistake.

Best,
Guy

 

[bmaughan]

Thanks for the input! I posted on Facebook and I’ll probably reach out to Tom.