Studio Mollan
Well-known member
- Joined
- Oct 26, 2011
- Messages
- 323
I'm investigating this for a project I'm currently working on.
I want galvanic isolation from a reamp interface to a fx-pedal/tape-echo/etc.
I need a 10k 1:1 transformer and a"NICE" one would set me back about 100€.
So on to the question.
These cheap Xicon transformers have a rated +-3db frequency response between 300Hz and3.5kHz.
Would driving the transformer via mixed feedback drive extend the response to something more useable?
Transformer datasheet:
https://www.electrokit.com/uploads/productfile/41016/41016665.pdf
Mixed feedback drive paper:
https://www.lundahltransformers.com/wp-content/uploads/datasheets/feedbck.pdf
/
Emil
I want galvanic isolation from a reamp interface to a fx-pedal/tape-echo/etc.
I need a 10k 1:1 transformer and a"NICE" one would set me back about 100€.
So on to the question.
These cheap Xicon transformers have a rated +-3db frequency response between 300Hz and3.5kHz.
Would driving the transformer via mixed feedback drive extend the response to something more useable?
Transformer datasheet:
https://www.electrokit.com/uploads/productfile/41016/41016665.pdf
Mixed feedback drive paper:
https://www.lundahltransformers.com/wp-content/uploads/datasheets/feedbck.pdf
/
Emil