OddHarmonic
Well-known member
I'm wondering if there is a fairly easy way to change the output fader into an output trim, say 6-10 dB. With my limited knowledge, I am seeing the 10K Log Pot (R13) acting as a voltage divider. If that is correct, wouldn't adding an additional resistor from the bottom leg of the pot to ground work, or would that effect the overall gain of U2B adversely...?
Thanks
Andrew
(Note, the last pair of op-amps in the following schematic are 5532s, not LM883/TL071s as they are notated)
Thanks
Andrew
(Note, the last pair of op-amps in the following schematic are 5532s, not LM883/TL071s as they are notated)