mick
Well-known member
I've used NewYorkDave's 'balancedmixnetwork' schematic (thank you very much Dave) to make a 16 input stereo bus in a patchbay just to see how well it works without spending too much money. I have to say very well (I only did a quick test to see if it was noisy, it wasn't, so don't ask how it sound's for mixing as I haven't tried that yet), now for some mono
inputs, I was wondering If I could make a mono bus, with four or six inputs,
then split that bus to come out on two patch leads and plug them into a stereo pair of the original stereo bus?. Would the 4K3's in Dave's schematic be all that I would need or would there be something else
needed like the Rx at the end of your balancedmixnetwork ?. This is just me being cheap and the fact that some 48 way patchbay's came my way for nothing, plus their in 2u boxes so their shielded and I thought it was worth a try.
Mick
inputs, I was wondering If I could make a mono bus, with four or six inputs,
then split that bus to come out on two patch leads and plug them into a stereo pair of the original stereo bus?. Would the 4K3's in Dave's schematic be all that I would need or would there be something else
needed like the Rx at the end of your balancedmixnetwork ?. This is just me being cheap and the fact that some 48 way patchbay's came my way for nothing, plus their in 2u boxes so their shielded and I thought it was worth a try.
Mick