Morley Ebtech Hum Eliminator 2 max input level?

[ilfungo]

Hi
someone can tell me the maximum input level of this unit?
I want to use it between my 192 out and amek console studio monitor input ( I've some ground loop between them that go away with Ebetech).
Can I use also some transformer as alternative?
I've 2 Edcor 10k:10K or 2 lundahl 1539
which one to use?

10k:10k or 600:600?
Thanks!!!

 

[Snatchman]

Hello..I don't know the published specs on the Ebtech, but I used one between the main outs of my analog console and monitors for years. The outs of the console was unbalanced but the input of the power amp was balanced. It worked great! No audiable noise or degradation to the signal.Handled the mixer's output stage without any distortion..

 

[ilfungo]

Thanks Snatchman
I want to use it between 192 output ( balanced) and Amek M2000 input ( unbalanced) for noise free.
I've tested it on this situation and work great , my only doubt is the level capabilities...
Thanks!!!