you push the buitton and then move fader or do you have to hold it down?
;; following setting configures the touch sensor behaviour. The touch sensors of the motorfaders
;; have to be assigned to the DIN pins in lc_io_tables.inc - the appr. IDs are:
;; ID_FADER_TOUCH_CHN1, ID_FADER_TOUCH_CHN2, ... ID_FADER_TOUCH_CHN8 (8 sensors)
;; If the master fader option is used, the ID is ID_FADER_TOUCH_MASTER
;;
;; TOUCH_SENSOR_MODE EQU 0: touch sensor events (pressed/depressed) be forwarded to the host program
;; like specified in the Logic/Mackie Control specification
;; TOUCH_SENSOR_MODE EQU 1: like mode 0, but additionaly the sensors will be suspended via MIOS, so
;; that they are not moved so long as the touch sensor is pressed
;; TOUCH_SENSOR_MODE EQU 2: like mode 0+1, additionally no fader move (PitchBender event) will be
;; sent when the touch sensor is not pressed.
;;
;; The mode "1" by default to avoid circular troubleshooting requests in the MIDIbox forum from people
;; who don't read this information before starting the application.
;; Mode "2" should be the prefered setting if your touch sensors are working properly
#define TOUCH_SENSOR_MODE 2
but I'm not clear whether this means 2 seperate midi connections or just a pass thru with the core modules
Enter your email address to join: